ZyXEL Communications ZYWALL SSL 10 Support Notes page 74

Integrated ssl-vpn appliance

Hide thumbs Also See for ZYWALL SSL 10:

Table of Contents

ZyWALL SSL 10 Support Notes

3) Configure the destination NAT setting as follow. Click OK button.

Step4. Go to menu Configuration > Admin > Management, change the HTTPS Port for

management from port 443 to another port number(ex. 10443). This is to make sure all

HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10. But if IT staff needs to

access the Netscreen by HTTPS, they still can use

https://IP_address:10443

(which the

IP_address might be Netcreen's LAN or WAN IP address depending on your management

setting). Apply the setting then.

Step5. Access

https://172.120.1.10

from an Internet PC's IE browser. The ZyWALL

SSL10's login page will be displayed for your login.

Table of Contents