ZyXEL Communications ZYWALL SSL 10 Support Notes page 6

Configuration information in this example:
ZyWALL UTM
WAN Address: 172.120.1.10
DMZ Address: 192.168.3.1
LAN Address: 192.168.1.1
To achieve this, we have to complete the following tasks:
Check ZyWALL UTM or 3
1. Configure the proper IP address for WAN, LAN, DMZ interfaces.
2. Configure port 443 forwarding to ZyWALL SSL10 for SSL traffic.
3. Change the system management port for HTTPS from 443 to others to avoid
conflict with SSL VPN port forwarding.
On ZyWALL SSL 10, using Wizard to setup the initial SSL VPN access network.
See the following step-by-step configuration.
Configuration on ZyWALL UTM
Step1. Check if the WAN, LAN, DMZ IP address has been proper configured.
1) Go to the GUI > Network > DMZ, configure the DMZ IP address as 192.168.3.1.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
192.168.10.200 ~ 192.168.10.250
rd
party Firewall's setting
ZyWALL SSL 10 Support Notes
ZyWALL SSL 10
WAN Address: 192.168.3.2
VPN Network: 192.168.1.0/24
Remote Users IP Address Pool:
6