ZyXEL Communications ZYWALL SSL 10 Support Notes page 73

ZyWALL SSL 10 Support Notes
4) Configure it as following figure. So any inbound traffic to https://172.120.1.10 will be
forwarded to the ZyWALL SSL10. Click OK button after it's done.
Step3. Add one firewall rule to allow SSL traffic from WAN to ZyWALL SSL10.
1) Go to menu Policies, choose from "Untrust" to "Trust" zone and click the New button at
the top corner.
2) Configure it as shown in the figure in red shape below. Other settings just leave it as
default and click Advanced button then.
73
All contents copyright (c) 2006 ZyXEL Communications Corporation.