ZyXEL Communications ZYWALL SSL 10 Support Notes page 82

Integrated ssl-vpn appliance

Hide thumbs Also See for ZYWALL SSL 10:

Table of Contents

ZyWALL SSL 10 Support Notes

Step4. Allow NetBIOS between WAN and DMZ, DMZ and LAN, LAN and WAN

1) Go to menu Network > LAN, to enable Windows Networking (NetBIOS over TCP/IP)

"Allow between LAN and WAN1" and "Allow between LAN and DMZ". Click Apply

button.

2) Switch to menu Network > DMZ, to enable Windows Networking (NetBIOS over

TCP/IP) "Allow between DMZ and WAN1" and "Allow between DMZ and LAN". Click

Apply button.

Step5. Create one static route for Full tunnel mode access. (Only for Full tunnel mode users

and when they need to access internal application servers by themselves. That is access

those server NOT through ZyWALL SSL10 portal.)

1) Go to menu Advanced > Static Route, click the modify icon to add a static route.

Table of Contents