2) Enter the information as below. Note the destination is the ZyWALL SSL10's remote
user IP. The gateway IP address is the ZyWALL SSL10's WAN IP. Click Apply button
then.
Note:
When a remote user login ZyWALL SSL10, he will get one IP(ex. 192.168.10.200 in
this example). The access will be Remote user client >> ZyWALL UTM's WAN >>
ZyWALL UTM's DMZ >> ZyWALLSSL10's WAN >> ZyWALL UTM's LAN.
However, the packet will be returned from ZyWALL UTM's LAN >> ZyWALL
UTM's WAN >> Remote user client. So the routing information is added for the
returned packets to force the traffic goes back via original path (ZyWALL UTM's
LAN >> ZyWALLSSL10's WAN >> ZyWALL UTM's DMZ >> ZyWALL UTM's
WAN >> Remote user client).
Remote User login
1) Remote user open an IE browser to link to https://172.120.1.10, it will display the
ZyWALL SSL10 login page.
2) Enter the username and password.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL SSL 10 Support Notes
83