ZyXEL Communications ZYWALL SSL 10 Support Notes page 81

ZyWALL SSL 10 Support Notes
UTM's HTTPS management port number from port 443 to another port number (ex. 10443).
This is to make sure all HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10.
But when IT staff needs to access the ZyWALL UTM by HTTPS, they can use
https://IP_address:10443 (which the IP_address could be the ZyWALL's LAN or DMZ or
WAN IP address depending on server access setting).
Note:
However, if you have configured a port-forwarding-rule 443 to a web server, we
suggest to utilize another WAN IP address of ZyWALL UTM device for ZyWALL
SSL10's access.
For example, if you have to configure WAN1 IP forward port 443 to another web
server, (ex. 192.168.3.10). We could use WAN2 interface (ex. IP address is 10.59.1.30) to
forward 443 to ZyWALL SSL10 as following figure.
81
All contents copyright (c) 2006 ZyXEL Communications Corporation.