ZyXEL Communications ZYWALL SSL 10 Support Notes page 50

Integrated ssl-vpn appliance

Hide thumbs Also See for ZYWALL SSL 10:

Table of Contents

ZyWALL SSL 10 Support Notes

However, if you found it's "Reject" or "Drop", you need to create one exception rule in

Rule Summary. Choose packet direction "WAN1 to DMZ", and press Insert button to

enter the information. After that, you will get the result as following figure.

Step3. Change the remote management port on ZyWALL UTM

1). Switch to menu ADVANCED > REMOTE MGMT > WWW, change the ZyWALL

UTM's HTTPS management port number from port 443 to another port number (ex. 10443).

This is to make sure all HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10.

But when IT staff needs to access the ZyWALL UTM by HTTPS, they can use

https://IP_address:10443

(which the IP_address could be the ZyWALL's LAN or DMZ or

Table of Contents