Time And Date Setting; Figure 229 Menu 24: System Maintenance; Figure 230 Menu 24.10: System Maintenance - Time And Date Setting; Command Interpreter Mode - ZyXEL Communications P-793H User Manual

P-793H User's Guide

35.3 Time and Date Setting

The ZyXEL Device's Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyXEL Device. Menu 24.10 allows you to update the time and
date settings of your ZyXEL Device. The real time is then displayed in the ZyXEL Device
error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.

Figure 229 Menu 24: System Maintenance

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyXEL Device as shown in the following screen.

Figure 230 Menu 24.10: System Maintenance - Time and Date Setting

Start Date (mm-nth-week-hr):
End Date (mm-nth-week-hr):
344
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8.

Command Interpreter Mode

9.

Call Control

10. Time and Date Setting

11. Remote Management

Menu 24.10 - System Maintenance - Time and Date Setting
Time Protocol= None
Time Server Address= N/A
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= (GMT+0100) Brussels, Copenhagen, Madrid, Paris
Daylight Saving= No
06 : 43 : 17
06 : 43 : 00
2000 - 01 - 01
2000 - 01 - 01
Jan. - 1st - Sun.(02)
Jan. - 1st - Sun.(02)
Chapter 35 Menus 24.8 to 24.11
- 00
- 00