ZyXEL Communications P-793H User Manual page 49

Table 2 Web Configurator Screens Summary (continued)
LINK/ICON
LAN
NAT
Security
Firewall
Content Filter
VPN
Advanced
Static Route
Bandwidth
MGMT
Dynamic DNS
Chapter 2 Introducing the Web Configurator
SUB-LINK FUNCTION
IP Use this screen to configure LAN TCP/IP settings and other
advanced properties.
DHCP Setup Use this screen to configure LAN DHCP settings.
Client List Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host
name).
IP Alias Use this screen to partition your LAN interface into subnets.
General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the ZyXEL Device.
Address Mapping Use this screen to configure network address translation
mapping rules.
General Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rules This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Keyword Use this screen to block sites containing certain keywords in the
URL.
Schedule Use this screen to set the days and times for the ZyXEL Device
to perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your ZyXEL Device.
Setup Use this screen to configure each VPN tunnel.
Monitor Use this screen to look at the current status of each VPN
tunnel.
VPN Global Use this screen to allow NetBIOS traffic through VPN tunnels.
Setting
Static Route Use this screen to configure IP static routes.
Summary Use this screen to enable bandwidth management on an
interface.
Rule Setup Use this screen to define a bandwidth rule.
Monitor Use this screen to view the ZyXEL Device's bandwidth usage
and allotments.
Dynamic DNS Use this screen to set up dynamic DNS.
P-793H User's Guide
49