Chapter 25 Internet Access Setup; Internet Access Setup; Figure 147 Menu 4: Internet Access Setup; Table 99 Menu 4: Internet Access Setup - ZyXEL Communications P-793H User Manual

Use this menu to configure your Internet connection. Use information from your ISP along
with the instructions in this chapter to set up your ZyXEL Device to access the Internet.
Contact your ISP to determine what encapsulation type you should use.

25.1 Internet Access Setup

Enter 4 in the main menu.

Figure 147 Menu 4: Internet Access Setup

The following table describes the fields in this menu.

Table 99 Menu 4: Internet Access Setup

FIELD
ISP's Name
Encapsulation
Multiplexing
VPI

Chapter 25 Internet Access Setup

Internet Access Setup
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= 0.0.0.0
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
DESCRIPTION
Enter a descriptive name for your ISP for identification purposes.
Press [SPACE BAR] and then press [ENTER] to select the type of encapsulation
your ISP uses.
Press [SPACE BAR] to select the method of multiplexing used by your ISP. Choices
are VC-based or LLC-based.
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit.
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
C
H A P T E R
P-793H User's Guide
2 5
267