Wireless Security: Wpa-Psk/Wpa2-Psk - ZyXEL Communications NBG-419N User Manual

Chapter 2 Connection Wizard
The following table describes the labels in this screen.
Table 7 Wireless Security: No Security
LABEL
Wireless
Network
Name
(SSID)
Security
mode
Exit
Back
Next

2.5.2 Wireless Security: WPA-PSK/WPA2-PSK

Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set
up a password for your wireless network.
Figure 14 Wireless Security: WPA-PSK/WPA2-PSK
34
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the NBG-419N, make sure all wireless stations
use the same SSID in order to access the network.
Select a Security level from the drop-down list box.
Choose None to have no wireless LAN security configured. If you do not
enable any wireless security on your NBG-419N, your network is accessible
to any wireless networking device that is within range.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
NBG-419N User's Guide