No Security - ZyXEL Communications NBG-419N User Manual

Chapter 11 Wireless LAN
Table 36 Network > Wireless LAN > General
LABEL
Operating
Channel
Security
Security
Mode
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.

11.4.1 No Security

Select No Security to allow wireless stations to communicate with the access
points without any data encryption.
Note: If you do not enable any wireless security on your NBG-419N, your network is
accessible to any wireless networking device that is within range.
Figure 68 Network > Wireless LAN > General: No Security
104
DESCRIPTION
This displays the channel the NBG-419N is currently using.
Select WEP, WPA-PSK or WPA2-PSK to add security on this wireless
network. The wireless clients which want to associate to this network
must have same wireless security settings as the NBG-419N. After you
select to use a security, additional options appears in this screen. See
11.4.2 and 11.4.3 sections.
Or you can select No Security to allow any client to associate this
network without authentication.
Note: If you enable the WPS function, only No Security, WPA-PSK
and WPA2-PSK are available in this field.
Click Apply to save your changes back to the NBG-419N.
Click Reset to reload the previous configuration for this screen.
NBG-419N User's Guide