Chapter 13 LAN
13.5 IP Alias Screen
Use this screen to have the NBG-419N apply IP alias to create LAN subnets. Click
LAN > IP Alias.
Figure 89 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 54 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
IP Subnet Mask
Apply
Reset
138
DESCRIPTION
Check this to enable IP alias.
Type the IP alias address of your NBG-419N in dotted decimal
notation.
The subnet mask specifies the network number portion of an IP
address. Your NBG-419N will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-419N.
Click Apply to save your changes back to the NBG-419N.
Click Reset to begin configuring this screen afresh.
NBG-419N User's Guide