ZyXEL Communications NBG-419N User Manual page 206

Chapter 27 Firmware Upgrade
The following table describes the labels in this screen.
Table 76 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Note: Do not turn off the NBG-419N while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before
logging into the NBG-419N again.
The NBG-419N automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 126 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, an error message appears. Click Return to go
back to the Firmware screen.
206
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to
two minutes.
NBG-419N User's Guide