ZyXEL Communications NBG-419N User Manual page 69

Table 26 Navigation Panel: Router Mode
LINK
RIP
Security
Firewall
Content Filter
Management
Bandwidth
Manageme
nt
Remote
Manageme
nt
UPnP
MAINTENANCE
General
Password
Time
Remote
Manageme
nt
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
Sys OP
Mode
NBG-419N User's Guide
TAB FUNCTION
Use this screen to enable RIPv1 or RIPv2, which are LAN
broadcast protocols.
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and
allows you to edit/add a firewall rule.
Use this screen to block certain web features and sites
containing certain keywords in the URL.
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a
bandwidth management rule.
Use this screen to view the amount of network
Monitor
bandwidth that applications running in the network
are using.
WWW Use this screen to be able to access the NBG-419N
from the LAN, WAN or both.
General Use this screen to enable UPnP on the NBG-419N.
Use this screen to view and change administrative settings
such as system and domain names.
Password Use this screen to change the password of your NBG-
Setup 419N.
Time Use this screen to change your NBG-419N's time and date.
Setting
WWW Use this screen to configure through which interface(s)
and from which IP address(es) users can use HTTP to
manage the NBG-419N.
Use this screen to upload firmware to your NBG-419N.
Use this screen to backup and restore the configuration or
reset the factory defaults to your NBG-419N.
Restart This screen allows you to reboot the NBG-419N without
turning the power off.
This screen allows you to select whether your device acts
as a Router or a Access Point.
Chapter 7 Router Mode
69