Dhcp Server; Chapter 14 Dhcp Server; Overview; What You Can Do - ZyXEL Communications NBG-419N User Manual

C
H A P T E R

14.1 Overview

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG-419N's LAN as a DHCP server or disable it. When configured as
a server, the NBG-419N provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on your LAN, or else the
computer must be manually configured.

14.2 What You Can Do

• Use the General
• Use the Advanced
the LAN to specific individual computers based on their MAC Addresses.

14.3 General Screen

Use this screen to enable the DHCP server. Click Network > DHCP Server. The
following screen displays.
Figure 90 Network > DHCP Server > General
NBG-419N User's Guide
(Section 14.3 on page 139) screen to enable the DHCP server.
(Section 14.4 on page
14

DHCP Server

140) screen to assign IP addresses on
139