ZyXEL Communications NBG-419N User Manual page 35

The following table describes the labels in this screen.
Table 8 Wireless Security: WPA-PSK/WPA2-PSK
LABEL
Wireless
Network
Name
(SSID)
Security
mode
Wireless
password
Verify
Password
Exit
Back
Next
Congratulations! Open a web browser, such as Internet Explorer, to visit your
favorite website.
Note: If you cannot access the Internet when your computer is connected to one of
the NBG-419N's LAN ports, check your connections. Then turn the NBG-419N
off, wait for a few seconds then turn it back on. If that does not work, log in to
the web configurator again and check you have typed all information correctly.
See the User's Guide for more suggestions.
Figure 15 Congratulations
You can also click ZyGO to open the Easy Mode Web Configurator of your NBG-
419N.
NBG-419N User's Guide
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the NBG-419N, make sure all wireless stations
use the same SSID in order to access the network.
Select a Security level from the drop-down list box.
Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key.
Choose this option only if your wireless clients support WPA-PSK or WPA2-
PSK respectively.
Type from 8 to 63 case-sensitive ASCII characters. You can set up the
most secure wireless connection by configuring WPA in the wireless LAN
screens.
Retype the password to confirm.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
Chapter 2 Connection Wizard
35