Table of Contents
Advertisement
C
H A P T E R
This chapter shows you how to upload a new firmware, upload or save backup configuration
files and restart the NBG318S.
22.1 Firmware Upload Screen
Find firmware at
"*.bin" extension, e.g., "NBG318S.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See the Firmware and Configuration File Maintenance chapter for upgrading firmware using
FTP/TFTP commands.
Click Maintenance > Tools. Follow the instructions in this screen to upload firmware to your
NBG318S.
Figure 120 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Table 96 Maintenance > Tools > Firmware
LABEL
File Path
Browse...
Upload
Do not turn off the NBG318S while firmware upload is in progress!
NBG318S User's Guide
www.zyxel.com
in a file that (usually) uses the system model name with a
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
22
Tools
215
Advertisement
Table of Contents
Troubleshooting
