Setting Up Multiple Networks; Figure 7 One Existing Powerline Network - ZyXEL Communications NBG-318S - V3.60 User Manual

9 If you disconnected your computer or modem (or any other networking product
connected to your powerline device) in step
them.
This sets up your powerline network between your powerline devices.

3.3 Setting Up Multiple Networks

You can use the ENCRYPT button to set up multiple powerline networks using your existing
powerline network.
For example, you have already set up a powerline network in your home (A) which accesses a
printer (B). Now you want a separate powerline network connection from your laptop to your
printer (C).

Figure 7 One Existing Powerline Network

B
1 Click the ENCRYPT button on (A) for more than 10 seconds until the HomePlug (
light is off. This disconnects (A) from (B).
2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of
each other.
3 Wait for about one minute while (A) and (C) connect.
4 Check the lights on both (A) and (C). When the HomePlug (
the devices are connected.
NBG318S User's Guide
A
Chapter 3 The ENCRYPT Button
1 of this section, you can now reconnect
C
) lights shine steadily,
)
41