ZyXEL Communications NBG-318S - V3.60 User Manual page 200

Chapter 20 System
Table 76 Maintenance > System > Time Setting
LABEL
End Date
Apply
Reset
200
DESCRIPTION
Configure the day and time when Daylight Saving Time ends if you selected
Daylight Savings. The o'clock field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Last, Sunday, October
and type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using Daylight Saving
Time at the same moment (1 A.M. GMT or UTC). So in the European Union you
would select Last, Sunday, October. The time you type in the o'clock field
depends on your time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Click Apply to save your changes back to the NBG318S.
Click Reset to begin configuring this screen afresh.
NBG318S User's Guide