No Security; Wep Encryption; Figure 47 Network > Wireless Lan > General: No Security; Table 27 Wireless No Security - ZyXEL Communications NBG-318S - V3.60 User Manual

7.5.1 No Security

Select No Security to allow wireless stations to communicate with the access points without
any data encryption.
If you do not enable any wireless security on your NBG318S, your network is
accessible to any wireless networking device that is within range.
Figure 47 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.

Table 27 Wireless No Security

LABEL
Security Mode
Apply
Reset

7.5.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your NBG318S allows you to configure up to four 64-bit or 128-bit WEP keys but only one
key can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
NBG318S User's Guide
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the NBG318S.
Click Reset to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
91