Telnet Screen; Figure 97 Telnet Configuration On A Tcp/Ip Network; Figure 98 Management > Remote Mgmt > Telnet; Table 71 Management > Remote Mgmt > Telnet - ZyXEL Communications NBG-318S - V3.60 User Manual

Figure 97 Telnet Configuration on a TCP/IP Network

18.4 Telnet Screen

To change your NBG318S's Telnet settings, click Management > Remote MGMT > Telnet.
The following screen displays.
Figure 98 Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 71 Management > Remote MGMT > Telnet
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset
NBG318S User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NBG318S using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
NBG318S using this service.
Select All to allow any computer to access the NBG318S using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG318S using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 18 Remote Management
179