ZyXEL Communications GS 2200 Manual page 50

Chapter 5 Initial Setup Example
Connect your computer to any Ethernet port on the Switch. Make sure your computer is in the same
1
subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access
2
the web configurator. See
Click Basic Setting > IP Setup in the navigation
3
panel.
Configure the related fields in the IP Setup
4
screen.
For the VLAN2 network, enter 192.168.2.1 as the
5
IP address and 255.255.255.0 as the subnet
mask.
In the VID field, enter the ID of the VLAN group to
6
which you want this management IP address to
belong. This is the same as the VLAN ID you
configure in the Static VLAN screen.
Click Add to save your changes back to the run-
7
time memory. Settings in the run-time memory
are lost when the Switch's power is turned off.
50
Section 4.2 on page 39 for more information.
GS2200-8/24 User's Guide