ZyXEL Communications GS 2200 Manual page 288

Chapter 37 Syslog
Click Management > Syslog in the navigation panel to display this screen. The syslog feature
sends logs to an external syslog server.
Figure 190 Management > Syslog
The following table describes the labels in this screen.
Table 119 Management > Syslog
LABEL
Syslog
Logging Type
Active
Facility
Apply
Cancel
288
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog setting
This column displays the names of the categories of logs that the device can generate.
Select this option to set the device to generate logs for the corresponding category.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
GS2200-8/24 User's Guide