Access Control; Chapter 35 Access Control; Overview; What You Can Do - ZyXEL Communications GS 2200 Manual

35.1 Overview

This chapter describes how to control access to the Switch.
A console port and FTP are allowed one session each, Telnet and SSH share nine sessions, up to five
Web sessions (five different user names and passwords) and/or limitless SNMP access control
sessions are allowed.
Table 104 Access Control Overview
Console Port
One session
A console port access control session and Telnet access control session cannot coexist when multi-
login is disabled. See the CLI Reference Guide for more information on disabling multi-login.

35.1.1 What You Can Do

• Use the Access Control screen
• Use the SNMP screen
• Use the Trap Group screen
should be sent to each SNMP manager.
• Use the User Information screen
authentication with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens
via web configurator at any one time.
• Use the Service Access Control screen
may use to access the Switch.
• Use the Remote Management screen
more "trusted computers" from which an administrator may use a service to manage the Switch.

35.2 The Access Control Main Screen

Use this screen to display the main screen.
GS2200-8/24 User's Guide
C
SSH Telnet FTP
Share up to nine One session
sessions
(Section 35.2 on page
(Section 35.3 on page
(Section 35.3.1 on page
(Section 35.3.2 on page
(Section 35.4 on page
(Section 35.5 on page
(Section 35.6 on page
HAPTER

Access Control

Web
Up to five accounts
261) to display the main screen.
262) to configure your SNMP settings.
264) to specify the types of SNMP traps that
265) to create SNMP users for
266) to assign which users can access the Switch
268) to decide what services you
268) to specify a group of one or
3 5
SNMP
No limit
261