ZyXEL Communications GS 2200 Manual page 300

Chapter 40 ARP Table
Click Management > ARP Table in the navigation panel to open the following screen.
Figure 199 Management > ARP Table
The following table describes the labels in this screen.
Table 126 Management > ARP Table
LABEL
Condition
Flush
Cancel
Index
IP Address
MAC Address
VID
Port
Type
300
DESCRIPTION
Specify how you want the Switch to remove ARP entries when you click Flush.
Select All to remove all of the dynamic entries from the ARP table.
Select IP Address and enter an IP address to remove the dynamic entries learned with the
specified IP address.
Select Port and enter a port number to remove the dynamic entries learned on the specified
port.
Click Flush to remove the ARP entries according to the condition you specified.
Click Cancel to return the fields to the factory defaults.
This is the ARP table entry number.
This is the learned IP address of a device connected to a Switch port with the corresponding
MAC address below.
This is the MAC address of the device with the corresponding IP address above.
This field displays the VLAN to which the device belongs.
This field displays the port to which the device connects. CPU means this learned IP address
is the Switch's management IP address.
This shows whether the MAC address is dynamic (learned by the Switch) or static (manually
entered in the Static MAC Forwarding screen).
GS2200-8/24 User's Guide