Figure 8-4 Lacp Trunk Configuration - SMC Networks TigerStack II SMC8926EM Management Manual

• Trunks dynamically established through LACP will also be shown in the Member
List on the Trunk Membership menu (see page 8-7).
Command Attributes
• Member List (Current) – Shows configured trunks (Unit, Port).
• New – Includes entry fields for creating new trunks.
- Unit – Stack unit. (Range: 1-8)
- Port – Port identifier. (Range: 1-25/49)
Web – Click Port, LACP, Configuration. Select any of the switch ports from the
scroll-down port list and click Add. After you have completed adding ports to the
member list, click Apply.

Figure 8-4 LACP Trunk Configuration

Creating Trunk Groups
8
8-9