Show Ip Ospf Neighbor; Table 42-19 Show Ip Ospf Neighbor - Display Description - SMC Networks TigerStack II SMC8926EM Management Manual

42
IP Routing Commands

show ip ospf neighbor

This command displays information about neighboring routers on each interface
within an OSPF area.
Syntax
show ip ospf neighbor
Command Mode
Privileged Exec
Example
Console#show ip ospf neighbor
ID
--------------- ------ ---------------- ---------------
10.1.1.252
Console#

Table 42-19 show ip ospf neighbor - display description

Field
ID
Pri
State
Address
42-50
Pri State
1 FULL/DR
Description
Neighbor's router ID
Neighbor's router priority
OSPF state and identification flag
States include:
Down – Connection down
Attempt – Connection down, but attempting contact (for non-broadcast networks)
Init – Have received Hello packet, but communications not yet established
Two-way – Bidirectional communications established
ExStart – Initializing adjacency between neighbors
Exchange – Database descriptions being exchanged
Loading – LSA databases being exchanged
Full – Neighboring routers now fully adjacent
Identification flags include:
D – Dynamic neighbor
S – Static neighbor
DR – Designated router
BDR – Backup designated router
IP address of this interface
Address
10.1.1.252