Envelope Selector Position Mismatch - Ricoh Aficio GX7000 User Manual

5. Plug the network interface board in securely, and then secure it by turning the screw.
6. Plug the printer's power cord into a nearby wall outlet, and then turn the printer on.
If the message reappears, contact your service representative.
• p.258 "Where to Inquire"

Envelope Selector Position Mismatch

The envelope selector is in the wrong position or the printer driver settings are wrong. Set the envelope
selector to the right position or change the printer driver settings. Alternatively, press the [Form Feed /
Head-cleaning] key, select a tray containing paper of the required size, and then print. To cancel the print
job, press the [Job Reset] key.
Check the position of the envelope selector
1. For envelopes, set the lever to the rear position
the forward position
Check the printer driver settings
1. In the application, open the printer properties dialog box.
2. Click the [Setup] tab.
3. Check the [Paper type:] setting.
Select the paper type from the [Paper type] dropdown list. For envelopes, select [Envelope].
.
BAJ058S
Status Monitor Errors
; for everything else, set the lever to
6
239