6. Troubleshooting
1.
Press the [Job Reset] key.
2.
Press the [#Enter] key.
6
3.
Press the [#Enter] key.
No Paper/Tray Not Detected (Bypass Tray)
There is no paper in the bypass tray or the paper is not loaded properly. Do one of the following:
• Loading paper (Press the [#Enter] key).
• Cancel the print job.
• see p.28 "Detaching and Reattaching the Multi Bypass Tray".
Loading Paper
Load paper in the bypass tray, and then press the [#Enter] key to begin printing.
1.
Load paper in the bypass tray.
216
BAG055S
BAG056S