Plugging In The Power Cord And Turning The Power On - Ricoh Aficio GX7000 User Manual

3. Check the orientation of each cartridge, and then install them gently.
Install in the following order from the left: black, cyan, magenta, and yellow.
4. Push in each cartridge by pressing on the PUSH area.
5. Repeat steps 3 to 4 for all four cartridges.
6. Close the right front cover.

Plugging in the Power Cord and Turning the Power On

Before connecting the printer to a computer, connect the printer's power cord and switch the printer on.
• Only connect the machine to the power source described on this sheet.
• Avoid multi-wiring.
• Connect the power cord directly into a wall outlet and never use an extension cord.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects on
it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur.
BAJ039S
BAJ009S
Setting Up the Hardware
41
2