Registering The Disc Title And Tracktitle - Aiwa CSD-MD5 Operating Instructions Manual

REGISTERING THE DISC TITLE
AND TRACK TITLE
1
2
3
4
5
6
1
2
1
4
4
4
3,6
CANCEL
DELETE
Press MD 011 to select MD function and insert
an MD.
Press TITLE in stop mode.
"Disc Title ?" is displayed for 10 seconds.
Within 10 seconds, press ENTER.
The unit turns into character entry mode.
Enter a character.
(1)
Press CHARACTER repeatedly to select the kind of
character (capital letters, small letters or number/
symbols).
,+
Capital Iett ers + Small letters
Numbers/symbols <
(2) Turn JOG DIAL to select a desired character.
(3) Press CURSOR ~ after you have selected a
character.
The selected character stops flashing and the flashing
moves to the right.
Repeat step 4 to enter all the characters (up to
50 characters).
Press ENTER.
When 4 MD EJECT is pressed to eject a disc, TOC
EDIT is displayed and the data concerning the contents
of the editing are registered.
To cancel entering
Press CANCEL.
To change a character
Press CURSOR ~ or ~ repeatedly until the character to be
changed flashes. Then enter the desired character again.
To delete characters
Press CURSOR - or ~ repeatedly until the character to be
deleted flashes. Then press DELETE.
To insert a space between the characters
Press CURSOR ~ or ~ repeatedly until the part to be
entered as a space flashes. Then press SPACE.
These symbols can be used
!"#$=zO& '()*+)-./:;<>? @_'
If the unit is left for one minute at ste~s 4 and 5, the
character entry mode is canceled.
18
ENGLISH