Playing Back The Copied Disc - Panasonic HDC-SD100 Operating Instructions Manual

Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection Cable while
copying. Also, do not shake this unit or the DVD burner.
It is impossible to stop copying halfway.
The order in which the scenes were copied cannot be changed.
Data that has been recorded on another device may not be copied.
When 2 or more discs are necessary for copying, the last scene copied to a disc is automatically
divided to fit the space on the disc.
The number of discs necessary for copying is automatically calculated. However, copying may be
completed using less discs than the number displayed if there is other data on the SD card or if
scenes were automatically divided.
When the disc that was copied to is played back on another device, the picture may momentarily stop
at the points where the scenes switch.

Playing back the copied disc

Only discs that have been copied by connecting this unit to the DVD burner or where motion
pictures have been recorded in AVCHD format can be played back. It may not be possible to
play back discs recorded on other devices.
1
Connect this unit to the DVD burner to prepare for playback. (F 92)
When playing back on a TV, connect this unit to the TV with HDMI mini cable, component cable or AV
cable. (F 84)
2
Use the cursor button to select [
(Destination disc for motion pictures)
Disc playback tab
3
Select the scene or still picture to be played back and then play it back.
The playback operation is performed the same as when playing back motion pictures or still pictures.
(F 70, 75)
It will return to Step 5 on page 93 when [EXIT] is selected in the thumbnail screen.
Press the DISC COPY button in thumbnail view to display the selection screen for copying data to a
disc. The data can be copied to a new disc inserted in the DVD burner. (F 96)
] (disc playback) tab.
(Destination disc for still pictures)
Disc playback tab
97
VQT1T90