Panasonic HDC-SD100 Operating Instructions Manual page 101

4
Select the desired number of prints,
then press the cursor button.
You can set up to 9 prints.
To cancel the setting, set the number of prints to [0].
Up to 8 files can be set in succession by
repeating steps 3 and 4.
5
Press the MENU button to
display the PictBridge menus.
MENU
6
Select the date print setting on
[DATE PRINT].
If the printer is not capable of date printing, this
setting is unavailable.
7
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4 5 INCH]: L size
[5 7 INCH]: 2L size
[4 6 INCH]: Postcard size
[A4]: A4 size
You cannot set paper sizes not supported on
the printer.
8
Select the desired layout setting
on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[ ]: Frame print
You cannot set page layouts not supported on
the printer.
9
Select [PRINT]
press the cursor button to print
the pictures.
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
[YES] and
101
VQT1T90