Messages - Panasonic HDC-SD100 Operating Instructions Manual

2
Indications
Major confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text.
CANNOT BE USED DUE TO INCOMPATIBLE DATA.
CANNOT RECORD - INCOMPATIBLE CONTROL DATA.
The recording format of the SD card is different so it cannot be used. Save the data on the SD card
to a PC, then use the SD card after formatting it on this unit.
CHECK CARD.
This card is not compatible or it cannot be recognised by the unit.
If this message appears even though motion pictures and still pictures are recorded on an SD card,
the card may be unstable. Reinsert the SD card, then turn the power off and then on again.
CARD LOCKED.
The write protection switch on the SD card is set to LOCK. (F 19)
THIS BATTERY CANNOT BE USED.
p Use a battery that is compatible with this unit. (F 15)
If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If
the message appears even after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do not attempt to repair it by
yourself.
p You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied AC
adaptor. (F 18)
ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.
An irregularity in the unit has been detected. Restart the unit by turning off and on the power.
CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT.
p The DVD burner is not correctly connected.
Disconnect and then reconnect the Mini AB USB Connection Cable.
p Connect a DVD burner that is compatible with this unit. (F 92)
PLEASE CHECK EXTERNAL DRIVE OR DISC.
A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or the
DVD burner is not recognised properly. Connect the Mini AB USB Connection Cable again and
insert a disc to copy the data. (F 92)
CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO RECORDED
IMAGES.
Data cannot be copied since a disc that cannot be used by connecting the unit and the DVD burner
or a used disc is inserted. Please use a new disc. (F 92)
DISCONNECT USB CABLE.
The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnect
the USB cable.

Messages

119
VQT1T90