Playing Back The Copied Disc - Panasonic HDC-SD100 Operating Instructions Manual

∫ To copy the data on a new disc successively after confirming the contents
of the copied disc by playing it back
Press the DISC COPY button on the
playback thumbnail view to display the
selection screen in Step 2, so that you can
copy data again.
≥ The disc that was copied to can be played back by connecting this unit and a DVD burner.
≥ Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection Cable while
copying. Also, do not shake this unit or the DVD burner.
≥ It is impossible to stop copying halfway.
≥ The order in which the scenes were copied cannot be changed.
≥ Data that has been recorded on another device may not be copied.
≥ When 2 or more discs are necessary for copying, the last scene copied to a disc is automatically
divided to fit the space on the disc.
≥ The number of discs necessary for copying is automatically calculated. However, copying may be
completed using less discs than the number displayed if there is other data on the SD card or if
scenes were automatically divided.
≥ When the disc that was copied to is played back on another device, the picture may momentarily stop
at the points where the scenes switch.

Playing back the copied disc

≥ Only discs that have been copied by connecting this unit to the DVD burner or where motion
pictures have been recorded in AVCHD format can be played back. It may not be possible to
play back discs recorded on other devices.
1
Connect this unit to the DVD burner to prepare for playback. (l 92)
≥ When playing back on a TV, connect this unit to the TV with HDMI mini cable, component cable or AV
cable. (l 84)
2
Use the cursor button to select [
A (Destination disc for motion pictures)
Disc playback tab
96
VQT1T81
DISC COPY
] (disc playback) tab.
B (Destination disc for still pictures)
Disc playback tab