Zoom In/Out Function; Digital Zoom Function - Panasonic HDC-SD100 Operating Instructions Manual

4
Recording
(Basic)
The maximum optical zoom ratio is 12 .
Rotate the mode dial to select
VOL
W T
1 1
W W T T
 
6 6
 
Zoom lever
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
The zoom speed varies depending on the
range over which the zoom lever is moved.
If you take your finger off the zoom lever during
zoom operation, the operation sound may be
recorded. When returning the zoom lever to
the original position, move it quietly.
When the zoom magnification is 12 , the
subjects are focused at about 1.2 m or more.
When the zoom magnification is 1 , this unit
can focus on a subject approx. 4 cm away from
the lens. (Macro function)
If the zoom lever is pushed to the end, you can
zoom from 1 up to 12
2.3 seconds. (The zoom speed does not vary

Zoom in/out function

.
W W T T
12 12
W W T T
 
in as fast as approx.
when operating with the remote control.) When
the zoom speed is high, the subject may not be
focused easily.
Zoom can also be operated using the multi
manual ring. (F 65)

Digital zoom function

If the zoom magnification exceeds 12 , then the
digital zoom function will be activated. The
maximum magnification provided by the digital
zoom can be selected.
Select the menu. (F 22)
[BASIC] [D.ZOOM]
[OFF]: Optical zoom only (Up to 12 )
[30 ]: Up to 30
[700 ]: Up to 700
If [30 ] or [700 ] is selected, the digital zoom
range is displayed in blue while zooming.
The larger the digital zoom magnification, the
more the image quality is degraded.
desired setting
43
VQT1T90