Panasonic HDC-SD100 Operating Instructions Manual page 55

Function
Built-in flash
Red eye reduction
Shutter sound
Auto slow shutter
Effect/Setting method
When the button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
Select the menu. (F 22)
[RECORD SETUP] [FLASH]
This function's default setting is [AUTO].
When the button is pressed halfway, the flash indicator will
appear in the bottom left corner of the screen.
[ON]: `
[AUTO]: `A
[OFF]:
When [AUTO] is set, the ambient brightness is automatically
detected, and the flash will activate only when necessary. (If the
flash is not necessary, the [`A] indicator will not appear when the
button is pressed halfway.)
To adjust the brightness of the flash
Select the menu. (F 22)
[RECORD SETUP] [FLASH LEVEL]
[` ]: Less brighter
[` 0]: Normal
[` ]: Much brighter
Reduces the phenomena where human eyes become red from
flashes.
Select the menu. (F 22)
[RECORD SETUP] [RED EYE]
You can add a shutter sound when recording still pictures.
Select the menu. (F 22)
[RECORD SETUP] [SHTR SOUND]
This function's default setting is [ON].
You can record bright pictures even in dark places by slowing
the shutter speed.
The intelligent auto mode is set to [OFF]. (F 45)
Select the menu. (F 22)
[ADVANCED] [AUTO SLOW SHTR]
The shutter speed is adjusted between 1/25 and 1/250 depending
on the surrounding brightness. (When adjusting the shutter speed
manually, it can be adjusted between 1/25 and 1/8000.)
If [AUTO SLOW SHTR] is set to [OFF], then the shutter speed will
be set between 1/50 and 1/250. (When adjusting the shutter
speed manually, it can be adjusted between 1/50 and 1/8000.)
[AUTO] or [ON]
desired setting
[ON]
[ON]
[ON]
VQT1T90
55