Panasonic HDC-SD100 Operating Instructions Manual page 79

3
(Only when [SELECT] is selected in step 2)
Select the scene/still picture to
be deleted, then press the cursor
button.
To unselect the scene/still picture, press the
cursor button again.
Up to 99 scenes can be selected to be deleted.
4
(Only when [SELECT] is selected in step 2)
Press the button.
When the confirmation message appears,
select [YES], then press the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-4.
When you stop deleting halfway
Press the MENU button while deleting.
The scenes or still pictures that have already
been deleted when the deletion is cancelled
cannot be restored.
To complete editing
Press the MENU button.
You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE]
[DELETE] [ALL SCENES] or [SELECT].
You can also delete still pictures by pressing
the MENU button, selecting [PHOTO SETUP]
[DELETE] [ALL SCENES] or [SELECT].
When play mode is set to [INTEL. SCENE],
scenes cannot be deleted.
To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (F 80)
Scenes/still pictures which cannot be played
back (the thumbnails are displayed as
cannot be deleted.
Do not open the SD card cover while deleting
motion pictures or still pictures on the SD card.
The deletion will stop.
In case of [ALL SCENES], the deletion may
take time if there are many scenes or still
pictures on the SD card.
Do not turn off this unit while deleting.
When you delete scenes/still pictures, use a
battery with sufficient battery power or use the
AC adaptor.
If you delete scenes recorded on other
products or still pictures conforming to DCF
standard with this unit, all the data related to
the scenes/still pictures may be deleted.
When still pictures recorded on an SD card by
other products are deleted, a still picture (other
than JPEG) that cannot be played back on this
unit may be erased.
)
79
VQT1T90