Panasonic HDC-SD100 Operating Instructions Manual page 127

Problem
VIERA Link does not
work.
When connected by the
USB cable, this unit is not
detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
The power of the DVD
burner cannot be turned
on.
Cannot see the PDF
operating instructions for
HD Writer 2.6E.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
Check points
p Connect with a HDMI mini cable (optional). (F 89)
p Press the MENU button, then select [SETUP]
[VIERA Link] [ON] with the cursor button. (F 89)
p Depending on HDMI terminal of the TV, the input channel
may not switch automatically. In this case, use the remote
control for the TV to switch input. (For details on how to
switch input, please read the operating instructions for the
TV.)
p Check the VIERA Link setting on the connected device.
p Turn the power to the unit off and then back on again.
p Set [VIERA Link] to [Off] on the TV and then turn it back to
[On]. (Refer to the operating instructions of the TV for
details.)
p Select another USB terminal on the PC.
p Check the operating environment. (F 107)
p Turn the power to the unit off and then back on again and
reconnect the USB cable.
p To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
p When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
p You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions
for HD Writer 2.6E.
p Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
127
VQT1T90