Panasonic HDC-SD100 Operating Instructions Manual page 54

Function
HD hi-speed burst
shooting
54
VQT1T90
Effect/Setting method
72 still pictures are recorded at a rate of 25 per second.
Use this function to record an object with fast movement.
The intelligent auto mode is set to [OFF]. (F 45)
1
Select the menu. (F 22)
[RECORD SETUP] [HI-SPEED BURST]
2
Press the button.
Up to 72 still pictures can be taken in burst mode. ([
red during recording.)
3
Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4
(Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
*
Start point
Finish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
[ON]
] flashes in