Messages - Panasonic SDR-H250EP Operating Instructions Manual

LSQT1210_EP(EN).book 93 ページ ２００７年２月９日 金曜日 午後６時０分

Messages

NO DATA.
CAN NOT RECORD. HDD
IS FULL.
CAN NOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT. BACKUP HDD THEN
FORMAT.
RECOMMEND DATA BACK
UP PERIODICALLY.
HDD BACKUP
RECOMMENDED.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CHECK CARD.
CARD LOCKED.
CARD FULL.
SCENE NUMBER IS FULL.
CARD DOOR OPENED.
ERROR OCCURRED.
RECORDING IS STOPPED.
CANNOT RECORD IN AGS
MODE.
There are no images recorded on the media.
The HDD is full or the number of scenes has reached the maximum
limit so no further data can be recorded. Back up the data on the
HDD to a computer, etc. and then delete unnecessary scenes or
format the HDD. (l 60, 65, 69)
The capacity of the HDD is limited. We recommend backing up
important recorded data periodically to a computer etc. to protect it.
This message does not indicate that there is a problem with this
unit.
There is a possible problem with the HDD. Immediately copy the
data on the HDD to a computer etc. and then have the unit repaired.
An 8 MB or 16 MB SD card has been inserted in video recording
mode.
This card is not compatible or it cannot be recognised by the unit.
The write protection switch on the SD card is set to LOCK. (l 16)
The SD card is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 60, 65) or insert a new SD card.
The card slot cover is open. Close it.
≥ When using an SD card that can be used for motion picture
recording (l 16)
When this message appears, it is recommended that you format the
SD card being used. (l 69) When an SD card is formatted, all the
data recorded on it will be deleted. Back up the data on the SD card
to a computer, etc. before formatting the SD card.
≥ When using any other card
Use a Panasonic SD card or another SD card which can be used to
record motion pictures. (l 16)
The AGS function is activated. (l 34)
Others
93
LSQT1210