Dial Tone Detection; Tti (Your Name) - Muratec MFX-1430 User Manual

Dial tone detection

Select if you set the dial tone detection.
Select [OFF] normally.
1
Press [DialTone Detect].
2
Select [ON] to detect the dial tone, and [OFF] if the detection is not required.
If you select [ON], you cannot transmit the faxes through the line that does not
aquire the dial tone.
3
Press [Enter] to save the setting.

TTI (your name)

Three types of TTI (Transmit Terminal Indentifier) can be set.
1
Press [TTI Enter/Edit].
2
Press [TTI 1].
3
Enter the TTI.
4
Press [Enter] after the entry to save it.
(For description of character entry, see "Entering characters" on page 1-10.)
5
In the same way, you can enter the TTI 2 and TTI 3.
1-20 G S
ETTING TARTED