Muratec MFX-1430 User Manual page 253

Duplex copying of a duplex document (2:2)
This mode will convert two-sided originals into two-sided documents.
* The duplex printing unit is required.
1
Set the front side of the duplex document in the ADF.
2
Press [Copy] to display the Copy standby mode.
3
Press [Others], [DuplexCopy].
NOTE: You can assign [DuplexCopy] to the soft key. See "Soft keys" on pages 10-2 to
10-6.
4
Press [2 -> 2 sided].
• If you set an advanced function, proceed to step 5.
• If you do not set an advanced function, proceed to step 7.
5
Press [Advance].
6
(1) Press [Bind] to set document bind position.
• Press [DuplexCopy] to return to the duplex copy display.
C 7-21
OPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
AI