Muratec MFX-1430 User Manual page 377

Message on the display
Rx document stored
Scanner Adjusting
Scanner in use
Select Paper Size
Select paper source
Select the bypass paper
that cannot be used for
Rx
Server Initializing
Server issue. Call for
service :error code
Set document in the
ADF.
Set individual forward-
ing numbers first
Set paper: XXXX
Set the individual for-
warding numbers first
Set the Read/Write
Code first.
Setting must be
changed from the
browser
Supply Separator Paper
in XXXX
The drum is low.
The following data is
required:
Fax or e-mail
The following data is
required:
Fax or e-mail, PIN
number
The LDAP server can-
not be found.Check the
LDAP server settings.
The NetBIOS name
entered is already in
use.
The number of file
attachments and/or
file size limit has been
exceeded. Please delete
attachments until you
reach the acceptable
limit.
To set the security reception to [OFF], first print out the stored security receipted docu-
ment.
Your machine's scanner is preparing. Please wait until the machine is ready.
The machine cannot execute the job until the current job finishes. Please wait.
The selected paper is not suitable for the document. Select other paper.
There is no paper that fits the copying document. Select on which paper to copy or load
paper.
The paper in the bypass tray cannot print out a received fax. To use the bypass tray
paper as a separator page, change the paper source in the bypass tray.
The machine's network is now preparing. Please wait until it is ready.
An internal network error has occurred. Contact your Muratec dealer.
You tried to make a [2  2side] or [2  1side] copy using the document glass. Those
copy are only available from the ADF.
The Fax Forward is not set up. To use this function, set up the forwarding condition in
advance.
There is no paper in the bypass tray. Load the paper indicated on the display.
The Fax Forward is not set up. To use this function set up the forwarding condition in
advance.
You tired to create a "Read Only" protect code prior to "Read/Write" code. Create a
"Read/Write" code first.
When the machine is on the Network, you cannot set Fax Forwarding from the machine
side. Use the browser for the setting.
The paper for separator reception has run out. Load paper in the designate cassette/
tray.
Your drum will need to be replaced soon. Please contact your Muratec dealer to pur-
chase a new drum cartridge.
The fax number or e-mail address is not registered to the Address Book. Either fax
number or e-mail address must be registered.
The fax number with PIN number or e-mail address is not registered to the Address
Book in PIN mask mode 1. Either fax number or e-mail address must be registered. For
fax numbers, the PIN number must also be entered after entering the fax number and
an "*" (asterisk).
The advanced search failed due to an internal machine error. Check the LDAP server
setting again, and try the search again. For more information about LDAP server set
up, refer to the "Network Guide".
The NetBIOS name conflicts with other device. Contact your Network Administrator.
You can add up to 10 network files (or up to 10 MB worth of files) to the scanned job.
Delete files so that it meets the limit.
Description / Solution
M & T
AINTENANCE ROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AI
14-21