Muratec MFX-1430 User Manual page 376

Message on the display
Paper size error for
XXXX
On XXXX
Please set paper (YYYY)
To cancel select [Cancel]
Paper supply empty.
PC Printing Canceled
Phone connection ter-
minated
PIN has not been reg-
istered.
Please enter a value
between 25-100%
Please enter a value
between 25-400%
Please enter text.
Please install the drum
cartridge correctly.
Please install the toner
cartridge correctly.
Please Remove Paper
Please set up Security
Reception
Please Supply Paper
Please wait...
Preparing
Press [Stop] to end the
job.
Press the Fax Cancel
key to stop the trans-
mission.
Printer in use
Printer Jam
Ratio is set to 100%.
Real time transmissions
cannot be archived.
Real time TX in prog-
ress. Cannot print.
Replace the drum.
Reset the document
14-20 M
AINTENANCE
The cassette/tray selected for printing has no suitable paper for printing the job. Please
set the paper indicated in the message and print your job, or press [Cancel] to cancel.
There is no paper that fits the copying document. Select on which paper to copy or load
paper.
In PC printing, the size of paper in the paper cassette does not match up the paper size
you specified by the printer driver. Press [Stop] to cancel a print job. Then load the cor-
rect paper size and try printing the document again.
The telephone connected to the machine is hanging up. Hang it down.
You selected "Mode1" in the PIN mask feature and tried to call an address book number
in which no PIN has been entered, or to call using numeric keys without a PIN. Enter a
PIN.
The value you entered exceeds the Zoom range. Enter a value within the range.
The value you entered exceeds the Zoom range. Enter a value within the
range.
You cannot view the text when there is no text entered. Enter the text in advance.
The drum cartridge is missing or has not been properly installed in your machine.
Please properly install the drum cartridge.
The toner cartridge is missing or has not been properly installed in your machine.
Please properly install the toner cartridge.
Paper has jammed in the machine. Follow the instruction on the display and removed
the jammed paper.
The Security Reception is not set up. To use this function set up Security Reception in
advance.
There is no paper either in the cassette or in the bypass tray. Load paper.
Your machine's printer is either warming up or busy. Please wait until the machine is
finished printing and then re-try your command or operation.
Your machine's printer is either warming up or busy. Please wait until the machine is
finished printing and then re-try your command or operation.
Document remains from the operation prior to the interrupt. Press [Stop] to discharge
the document.
[STOP] is pressed during fax transmission. Cancel the transmission by [Fax Cancel/Job
Confirm.].
The machine cannot execute the job while printing. Wait until the printing is finished
and re-try the operation.
Paper has jammed. Follow the guidance on the display and remove the paper.
The zoom ratio is set to 100%. To change the zoom ratio, set it again.
You tried to send a fax using real time transmission or set memory transmission to
[OFF] when the archive function is set up. To archive the document, use memory trans-
mission.
The machine cannot print out the job until the current communication finishes. Please
wait.
The drum cartridge has run out. Replace with a new drum cartridge.
Remove the document from the ADF, and set them again.
& T
ROUBLESHOOTING
Description / Solution