Advanced Copy Functions - Muratec MFX-1430 User Manual

Advanced copy functions

The table below lists the advanced functions that can be used in the Copy mode.
To select the advanced copy functions:
1
Press [COPY] to display the Copy standby mode.
2
Press [Others].
3
Press the key you want to select.
Refer to the pages indicated for detailed information.
NOTE: You can assign a function that you frequently use to a soft key for instant
recall. (See pages 10-2 to 10-6.)
Advanced function
Bypass
Zoom
Sort
Combine
Duplex Copy
Doc.Size
Card Copy
* The duplex printing unit is required. [Duplex Copy] is displayed when the duplex
1
printing unit is not installed.
* Card Copy is available from document glass only. This function is not available
2
for F-560/F-520.
7-10 C
OPYING
Use this to set the paper type on the bypass
tray.
Use this to set the magnification for zoom copy. p. 7-12
Enable or disable the sort copy.
Enable or disable the combine copy.
Enable or disable the duplex copy.
*1
Specify the size of the document to be copied.
Enable or disable the card copy.
*2
Descriptions Reference Page
p. 1-32
p. 7-13
p. 7-14
p. 7-16
p. 7-27
p. 7-25