Table of Contents
Advertisement
Change COM Port Setting
This setting controls the COM port setting.
COM Port on BMC
This setting disables/enables the COM port on BMC.
System Event Logging
This setting disables/enables the logging of system events.
Clear System Event Log
Enabling this selection will force the BIOS to clear the System Event Log on the
next boot. Options: [Disabled], [Enabled].
Existing Event Log Number
It shows the number of existing event logs.
Remaining Event Log Number
It shows the number of remaining event logs.
SYS Firmware Progress
Enabling this selection will log system POST progress. Options: [Enabled],
[Disabled].
BIOS POST Errors
Enabling this selection will log BIOS POST errors. Options: [Enabled], [Disabled].
BIOS POST Watchdog
You can enable the system watch-dog timer, a hardware timer that generates
either an NMI or a reset when the software that it monitors does not respond as
expected each time the watch dog polls it (select the time period in a separate
field). Enabling this selection will enable BIOS POST watchdog. Options:
[Enabled], [Disabled].
OS Boot Watchdog
You can enable the system watch-dog timer, a hardware timer that generates
either an NMI or a reset when the software that it monitors does not respond as
expected each time the watch dog polls it (select the time period in a separate
field). Enabling this selection will enable OS boot watchdog. Options: [Enabled],
[Disabled].
Timer for Loading OS
This setting selects the watchdog time period for loading OS.
Time Out Action
This setting determines the action of the watchdog timer if the OS fails to boot
within the preset time period.
BIOS Setup
4-17
Advertisement
Table of Contents
