Table of Contents
Advertisement
w
Configuring Internet Browsers on Windows
If you are managing a local storage array and your computer uses a proxy
server, you need to configure your browser to enable Adaptec Storage Manager
to bypass the proxy server. Also, if you are managing remote systems, you need
to configure Adaptec Storage Manager to bypass the proxy server when commu-
nicating with these systems.
The following procedures are described in this section:
Configuring Internet Explorer for Local Management
Configuring Internet Explorer for Remote Management
Configuring Netscape Navigator for Local Management
Configuring Netscape Navigator for Remote Management
Configuring Internet Explorer for Local Management
W hen using the High security setting, you must enable the following settings
manually:
l
JavaScript
l
Cookies (not stored)
You do not need to enable the following custom level security settings for the
local Intranet in Internet Explorer 5 and 5.5. Select Tools > Internet Options to
access these settings:
l
Active Scripting
l
Allow per session cookies (not stored)
MSI Reminds You...
In Internet Explorer 6.0 there is no security setting for cookies. Cookie
configuration was removed from the Privacy tab. There is no setting for
blocking Intranet cookies.
If you are using a proxy server to access the Internet, you must bypass the proxy
server to access the Adaptec Storage Manager Web server. To verify whether
you are using a proxy server:
1. From the Internet Option window, click the Connections tab.
2. Click LAN Settings.
l
If the Use a proxy server box isn't checked, exit by clicking OK. You
aren't using a proxy server, so ignore this setting.
l
If the Use a proxy server box is checked, make sure the Bypass proxy
server for local addresses box is also checked. Then, click the
Advanced button. In the Exceptions window, enter localhost as an
entry.
You are now ready to proceed to Using Adaptec Storage Manager – Browser
Edition.
Configuring Internet Explorer for Remote Management
If you know the IP address of the system you want to manage remotely:
1. Choose Tools > Internet Options > Connections > LAN Settings.
2. Select Use a proxy server for your LAN > Advanced.
3. In the Exceptions section, type the managed system's IP address.
Adaptec SATA RAID Utility for Intel ICH5R
B-9
Advertisement
Table of Contents
