Table of Contents
Advertisement
MS-9246 1U Rackmount Server
DM I Event Logging
Press PgUp/<+> or PgDn/<-> to view DMI event logging.
View DM I Event Log
Press [Enter] to view the contents of the DMI event log.
Event Logging
This setting disables/enables the BIOS to log DMI (Desktop Management Interface)
events. Setting options: [Disabled], [Enabled].
ECC Event Logging
This setting disables/enables the BIOS to log ECC (Error Checking & Correcting)
events. Setting options: [Disabled], [Enabled].
Mark DM I Events as Read
Press [Enter] and a screen pops up, asking users to confirm whether or not to
clear all DMI event logs immediately. Press [Y] and [Enter], the BIOS will clear all
DMI event logs right away.
Clear All DM I Event Logs
W hen this setting is set to [Yes], the DMI event log will be cleared at next POST
stage. Then, the BIOS will automatically set this option to [No]. Setting options:
[Yes], [No].
Console Redirection
Press PgUp/<+> or PgDn/<-> to configure Console Redirection.
4-14
DMI Event Logging
Event Log Validity:
Event Log Capacity:
View DMI Event Log:
Eve nt Loggi ng:
ECC Event Logging:
Mark DMI Events as Read:
Clear All DMI Event Logs:
Console Redirection
BIOS Redirection Port:
Baud Rate:
Flow Control:
Console Type:
FIFO Level:
Console Connection:
Continue C.R. after POST:
# of Video Pages to Support:
Valid
Space Available
[Enter]
[Enabled]
[Enabled]
[Enter]
[No]
[Disabled]
[19.2K]
[CTS/RTS]
[PC ANSI]
[Level 14]
[Direct]
[On]
[1]
Advertisement
Table of Contents
